Insert SIM, battery, and memory card
Learn how to insert the battery and SIM and memory cards.
Important: This device is designed to be used with a standard SIM card (see figure) only. Use of
incompatible SIM cards may damage the card or the device, and may corrupt data stored on the
card. Please consult your mobile operator for the use of a SIM card that has a mini-UICC cutout.
© 2015 Microsoft Mobile. All rights reserved.
4
Use only compatible memory cards approved for use with this device. Incompatible cards may
damage the card and the device and corrupt data stored on the card.
Note: Switch the device off and disconnect the charger and any other device before removing
any covers. Avoid touching electronic components while changing any covers. Always store and
use the device with any covers attached.
1. Press the back cover with your thumb, carefully lift the bottom edge of the back cover with your
fingers, and remove the cover.
2. If the battery is in the phone, lift it out.
3. Slide the SIM in with the contact area face down.
4. Push the memory card into the memory card slot.
5. Line up the battery contacts, and put the battery in.
6. Replace the back cover.
Remove the SIM card
Open the back cover, remove the battery, and slide the SIM out.
Remove the memory card
Open the back cover, remove the battery, and pull the memory card out.
© 2015 Microsoft Mobile. All rights reserved.
5
Switch your phone on
Press and hold the power key.